Contact Us Call us Today (973) 838-6500

BI-Lok Tube Fittings Cryogenic Products Check Valves Needle Valves Quarter Turn Valves Relief Valves Regulators Cryogenic Liquid Cylinder Accessories Custom Solutions
     Cryogenic Products

     Check Valves

     Needle Valves

     Quarter Turn Valves

     Relief Valves

     Regulators

     Cryogenic Liquid Cylinder Accessories

    Home    >    Products    >    Check Valves    >    Poppet Check Valve

Poppet Check Valve



Enlarge Image

1/8” - 1/2” Dual Ferrule Tube
Female NPT & Male NPT
1/4” Face Seal 0 - 3000 Psig

Description

Poppet type, zero leak, inline check valve for liquid and gas applications to 3000 Psig. Fully retained O’ring seal design permits full rated pressure in the checked direction. Offered with fully interchangeable dual ferrule tube or metal to metal face seal connections. A variety of crack pressures and seal materials, combined with a metal to metal positive stop provides long trouble free service life in the most demanding applications.

Resources
Print this page
PCV Literature
User Instructions
Additional Resources
Catalogs
Certifications
Cv Calculator
Flow Calculator
Need Help ?
(973) 838-6500
Contact Us

Features

  • Working Pressures to 3000 Psig (206 bar)
  • Full Back Pressure Rating
  • Fully Retained O’Ring Seal
  • Dual Ferrule Tube, Female NPT, Male NPT and Face Seal Connections
  • Cracking Pressures from 0.3 to 25 Psig (0.02 - 1.7 bar)
  • 100% Factory tested for crack, leakage and reseal performance

Technical Data

  • Nominal Crack Pressures: 0.3, 1, 10, & 25 Psig (0.02, 0.07, 0.7 & 1.7 bar)
  • Maximum Pressure: 3000 Psig @ 70°F (206 bar @ 21°C)
  • Temperature Rating:
    • -80°F to 375°F (-62°C to 190°C)
    (based on seal selection, see ordering information)

Materials of Constructions

Component Valve Body Material
Brass Stainless Steel
Inlet Cap, Outlet Body, Poppet Brass, ASTM B16 316 SS, ASTM A4791
O'Ring Retainer 316 SS, ASTM A479
Spring 302 SS, ASTM A313
O'Ring Seal2 Buna-N VitonTM
1 PTFE dry lubricant applied to threads
2  Lubricated with KrytoxTM GPL-202

Dimensionsional Data


Model Code Port Configuration Dimensions / Flow
Inlet Outlet A11 (inches) Hex Cv
PCV-2T 1/8” Tube 1/8” Tube 2.19 5/8" 0.10
PCV-2P 1/8” Male NPT 1/8” Male NPT 1.71
PCV-2F 1/8” Female NPT 1/8” Female NPT 1.89
PCV-4VS2 1/4” Face Seal 1/4” Face Seal 2.21 0.47
PCV-4T 1/4” Tube 1/4” Tube 2.35
PCV-4P 1/4” Male” NPT 1/4” Male NPT 2.09
PCV-4F 1/4” Female NPT 1/4” Female NPT 2.15 3/4"
PCV-6T 3/8” Tube 3/8” Tube 3.17 7/8" 1.47
PCV-6P 3/8” Male NPT 3/8” Male NPT 2.78
PCV-6F 3/8” Female NPT 3/8” Female NPT 2.98
PCV-8T 1/2” Tube 1/2” Tube 3.42 1.68
PCV-8P 1/2” Male NPT 1/2” Male NPT 3.16
PCV-8F 1/2” Female NPT 1/2” Female NPT 3.58 1-1/16"
1 Dimensions are shown with nuts finger-tight
2 316 SS only
Flow tested in accordance with ISA S75.21 with air. Restrictions in the inlet or outlet piping may reduce flow.

Ordering Information



PROPER COMPONENT SELECTION - When specifying a component, the total system design must be considered to ensure safe and trouble-free performance. Intended component function, materials compatibility, pressure ratings, installation, environment and maintenance are the responsibility of the system designer.