Series PMV Precision Metering Valves are designed for accurate and repeatable flow control of fluids and gases. Valves feature a one-piece forged body and screwed bonnet design. A stainless steel 3-degree tapered stem seals bubble tight into an Acetal soft seat.
With panel mounting and lockable adjustment standard, these valves offer cost-effective solutions for precise metering. Available in Straight or Angle configurations with NPT or Dual Ferrule Tube connections. Vacuum to 1000 PSIG.
- Straight or Angle Flow Patterns
- Forged Body Brass or Stainless Steel Construction
- NPT or Dual Ferrule Tube Connections
- Unique Soft Seat Provides Positive Shut Off
- Wear Compensating Knob Adjustment
- Locking Screw Prevents Inadvertent Flow Changes
- Panel Mounting Standard
- Stem Threads Isolated from System Fluid
- Factory Preset for Zero Flow at Positive Stop with 150 PSIG
- 100% Factory Tested for Leakage
- Available Cleaned & Packaged for Oxygen Service
- Maximum Operating Pressure @ 100°F: 1000 PSIG (68.9 bar) — Brass and Stainless
- Orifice: 0.055" (1.4 mm)
- Flow Coefficient (Cv): 0.04 (maximum, fully open)
- Stem Taper: 3 Degree (included angle)
- Stem Pitch: 40 Threads per inch
- Temperature Range: -50°F to 180°F — seal dependent (all seals max 180°F)
- Panel Mount Hole: 9/16" (14.3 mm) | Max Panel Thickness: 1/8" (3.3 mm)
- All valve bodies are 3/4" (19 mm) wide
- Note: Valves may require up to one full turn before flow is evident
- Factory preset for zero flow at positive stop with 150 PSIG (10.34 bar)
